You can definitely do your pressure washing without using any detergent. But the problem is, you have to afford more. The reality is an effective cleaning process either by pressure washer or by manual process-both demand using soap, dish soap detergent, or any other like these.
However, if you are intending to clean over rough or tough stains, you will mandatorily need to use there a perfect detergent, or a strong floor cleaner. Detergents are such items, that fight well with dirt with grime compared with cleaning with water only. But here one matter is important, choosing the perfect detergent so that your pressure unit does not damage anyhow!
So let’s see the details of Can I use pressure washer without detergent
Can I Use Pressure washer without detergent?
Of course, you can. But if you want to stop using the detergent, obviously you have to increase the spray speed. Also you sometimes you also might have to use a cleaning solution other than soap or detergent. A highly powerful spray is enough capable to cut old stains or other surface-adhered dirt or grimes.
In that case, if the stain is stubborn, only water is not enough to remove it. The primary or mild stain you can clean through high-powerful pressure washing. For stubborn ones, you have to either use pressure washer soaps, or a detergent solution, or you have to go with any chemical alternatives for your pressure washers.
Alternatives of Detergent:
If you know you can use pressure washer without detergent, then the second question may come, what would be the alternative to these chemicals? Or are there any alternatives to this? Positively we have alternatives to detergent.
Use vinegar:
Vinegar is a homemade stain remover, which even can remove the tough dirt and old strain from the hard surface. Make a solution of 8 parts water with 3 parts of homemade vinegar. You also can purchase acetic acid from grocery soap. Apply the vinegar solution on the floor and let it set for 20 minutes. After that go with the pressure washing for final cleaning.
Use high speed:
Increase the water spraying speed. A high pressure/high water speed will get an additional force to directly invade through the grime, therefore through the strain as well. Ultimately when the grime will be loosened, will remove from the surface. If you want to clean surfaces only with alone water, this method is for you. But remember one thing, increasing the pressure speed often could cut the concrete floor as well. So be sure at the increased speed you are not going to damage the floor ultimately.
Use metal scrubber/metal sponge:
This is a manual process. Before starting the pressure washing, pour one bucket of water on where you are going to clean. And then use the metal scrubber or metal sponge to rub the wet dirty area. Doing so will remove the dirt. But before doing this, be careful about the surface. That means where you are going to clean. You cannot rub a glass surface or a plastic surface with a metal scrubber.
Use Coca-Cola:
Coca-cola or any other high-carbonated beverage also could take place the detergent. Pour one bottle (the amount may increase depending on the area) on the dirt surface. Let the surface absorbs this beverage for 20 minutes. After that take a soft floor mop or floor cleaning brush. Brush the area for another 4 to 20 minutes.
And finally, use a pressure washer to clean surface dirt. One of my friends asked me a few days ago, can he use a carbonated drink on the detergent tank to replace the pressure washer detergent! I said to him no, cause pressure washer soap dispensers or detergent tanks are only dedicated to soap or detergent. If you use the alternatives of cleaning solution here-especially the carbonated or vinegar solution will not make the cleaning efficient in this way.
Go with Bleach powder:
Weather the bleaching powder or the bleaching solution both are okay to clean the surfaces without detergent. Let me ask one thing! Why do you need to use the detergent when you use a pressure washer? It is only because, to clean the stubborn dirt, grime, and other related. So if you want to use detergent when pressure washing, you have to manually go with any process by which you can remove strains.
However, bleaching powder easily can remove the stains and odor from any hard surface (surfaces like wood, concrete, hard rubber, etc.). So spread the bleaching powder over the surface, and let the dirt get away from the bleach. Finally pressure washer with only clean water.
FAQs:
Can you pressure wash with just water?
You can! Depending on the stain type, stain age, and the cleaning surface-you might have to increase the speed of most pressure washers. High-speed spraying (only water) could easily remove tough dirt from the concrete even.
Can you pressure wash concrete with just water?
Yes! Moreover, it is efficient. Because a high speed only with water leaves a less risk to cut the concrete floor.
Can I just wash my car with just a pressure washer?
If the speed stays within 1200 – 1900 PSI, you can clean the car using soap or detergent with your pressure washer. However, you also can use a dedicated concrete cleaner by which you can clean the driveways efficiently.
Final Verdict:
If you don’t want to damage your pressure washer, you may want to avoid pressure washer detergents. There are so many alternatives of pressure washer detergents-suitable you can go with. If after the pressure washing, you do not satisfy with the plain water cleaning-you can use any cleaning solution, available in the market. Or sometimes some DIY projects also are there to help you you can make your cleaning efficient and productive.
So that’s all on Can I use Pressure washer without detergent or not? Hope reading this article will help you a lot!
